size guide

Ring size

Here are simple recommended steps to measure your ring size : (However we advise you visit a jeweler for accurate results)

  1. Wrap a piece of loose string around your finger. Be sure to allow for the size of your knuckle.
  2. Using a pen, mark the point on the string where the end meets, and measure the length in mm.
    This measure will be the circumference of your finger, please look it up in the table.
  3. Note: if you know your USA ring size you may also look it up in the table.
    If you have any question please Contact us.
Circumference Taiba Size UK USA Diameter in (mm)
48 mm 8 I 1/2 15.2 mm
49 mm 9 J 1/2 5 15.6 mm
50 mm 10 L 16 mm
52 mm 12 M 6 16.4 mm
53 mm 13 N 16.8 mm
54 mm 14 O 7 17.3 mm
55 mm 15 P 17.7 mm
56 mm 16 Q 8 18.1 mm
57 mm 17 Q 1/2 18.5 mm
59 mm 18 R 1/2 9 18.9 mm
60 mm 20 S 1/2 19.3 mm
61 mm 21 T 1/2 10 19.7 mm
62 mm 22 U 1/2 20.1 mm

Bangle & Bracelet size

  • Use the tape measure or a strip of paper to measure your wrist.
  • Add one inch, or 2.5 centimetres, onto this measurement to get the final length of your bracelets.
  • Make sure you allow about (2 cm example) extra length for best fitting.
  • Then you can look up the result on the following chart.
OUR MEASURE Taiba SIZE INNER DIAMETER (MM) INNER DIAMETER(Inch)
Child size 12 38 mm 1.5 inch
Child size 13 42 mm 1.625
Child size 14 45 mm 1.75
Child size 15 48 mm 1.875
Child size 16 51 mm 2
Very small 17 54 mm 2.125
Small 18 57 mm 2.250
Medium 19 61 mm 2.375
Medium / Large 20 64 mm 2.5
Large 21 67 mm 2.625
Extra large 22 70 mm 2.750